Passive Cooling System for the Cold
The point is that the cool system is already supported by the processor and motherboard
relatively low-voltage cold enough so it does not need active cooling. The cooling system is required only passive cooling, which requires only a heatsink without
fan is required. This PC system can be built with the VIA / Cyrix which has a voltage
low. Actually, this system is suitable for conditions that require low noise conditions,
but unfortunately seems to have to sacrifice performance. An example is the Notebook.
Cooling System for Low Noise
Some of the people or the working environment requires a state of quiet working / not noisy. PC
standard with the standard cooling is enough to disturb this state. It causes
noise of a PC is very diverse, from the motor can CDROM drive, hard drive, cooling
processor (the processor and graphics card if any), of the power supply or cooling of the exhaust fan
PC casing. For this condition, the heat sink manufacturers make a cooling system
use of fan motors have a low noise level. Motor fan is specially designed with
chasing motorcycles equipped with dampers that reduce the sound coming out of the motor fan.
Indeed, in terms of the size of the fan motors with dampers will be slightly larger than the motor fan
regular processor cooling, but the sound produced will be smaller.
Cooling for Energy Efficient System
Many PC manufacturers that produce energy-efficient computing systems. In addition the average
notebook implement and requires a system that is energy efficient. One of the saving
this energy is carried out on the cooling system. Indeed, some manufacturers have made a processor
low-voltage version of the processor that has a working temperature is colder than other processors,
but for use with a long duration, the processor still requires a cooling system.
Not to mention Intel processors that have a speed step technology that can be adjusted to the speed
processor, this would require a cooling system that automatically follow the requirements
cooling.
For that didesainlah cooling system more effective and efficient. This can be done with
provide adequate ventilation in the system, the use of the heatsink (the heatsink) is an extra
of the processor, or uses a controlled fan that will work in accordance with
needs.
On some motherboards have been equipped with a temperature sensor that will monitor the processor temperature and
also been equipped with a switch (the switch) automatically for the processor cooling fan. This is very helpful
in building systems that are energy efficient because the fan will only work if the temperature of the processor has
reaches a certain level. But for the motherboard is not equipped with such facilities, we
can use a cooling system that has a temperature sensor and automatic switch installed.
Usually the sensor and an automatic switch is located on the heatsink fan will turn on if
processor temperature has reached a certain level.
Cooling System for High Performance Systems
The definition of high-performance system here is the level of computing systems and
high system reliability with the life or long duration of action. Usually the system
is dedicated to the machine or the server is also a special-purpose system that demands
reliability and high performance. This system will certainly result in a higher heat of
regular system. For this high-performance cooling systems, cooling systems are certainly not ordinary
sufficient, for it made some kind of cooling system. We can use a heatsink
Extra large, designed to shape effective to absorb and release heat,
use a fan motors that have a high rotational speed, or using a fan
have a larger bar / wide or even longer. Certainly do not forget to also combined
a casing which is cool. The purpose of this cold case is the number of air vents
and usually is equipped with a ventilation exhaust fan. But usually the cooling system for high-performance system will be more noisy and more wasteful of power. Apart from the system
cooling is applied to it, sometimes the system requires a cool environment
with good air circulation. Sometimes it also takes a special room for this system so that
system to work optimally.
In fact is to overclock the PC system is not recommended
by the manufacturer of the processor, because the risk of damage and
age of the system is shorter because the application of techniques
overclock it. But sometimes for the mania overclock halhal
that they ignore. Sometimes even their
build a system to overclock with the cost of
more likely to buy a cooling system and devices
Another supporter of the if they buy a system with
higher levels of performance. Not to mention if the processor
or other device is damaged and they should replace it.
Does not make sense, but they will feel
unparalleled satisfaction if they can improve the performance of the system but remains stable.
Moreover, there is a special site which includes mania overclock complete data is to overclock the system,
heart of the mania overclock will be more heat to be able to overclock the system exceeds the other.
It could be mounted to the cooling system should mania overclock themselves ☺.
From this arises the mania overclock some performance cooling system technology
high. An example is the use of which is no longer an extra heatsink, but it was over big with the
PC casing which has lots of ventilation exhaust fan plus an extra strong. In addition we
can use the coupled / heatsink combo, which brings together two heatsinks. There is also a
using a heatsink extention / extra, this will add heatsink on top of the heatsink & fan
standard processors. Sometimes the copper pipes of heat required to distribute the heat
from the first heatsink to an additional heatsink. There also are using more than one fan,
heatsink design would certainly fit that can be attached to more than one fan.
Well, for mania overclock no problem with money, they can use the system
water-based cooling. The cooling system works like a car radiator system. Affection
PC system is so complicated because there are 2 hoses that connect the blocks with a water reservoir. But
for the overclocker, it does not matter. Just be careful not to leak water.
Actual use of peltier system is ideal for mania overclock because the system can
"Freeze" the processor. Unfortunately peltier system is too difficult and problematic to be installed and
configured. Not to mention there is condensation or condensation effects that often arise
when a new PC system on several minutes. Besides the cooling system is known to be very
wasteful as it can consume 80 to 130 Watt for his own. Not to mention the Peltier
itself generates excessive heat which work should also be discarded. Indeed, this system can
cool the processor very well, but the trouble it caused, this system
so it is not popular and few are willing to wear them.
An overclocker has managed to combine three types of cooling system on his PC, which is
air cooling systems, water cooling system and the last is the peltier.
